E-Sea Cleat-Suction Mounted Utility Cleat

Conveniently add a utility cleat anywhere you need with E-Sea Cleat! This suction mounted utility cleat is perfect for tying up paddle boards and kayaks. It can also be used on your boat to secure your fenders and other accessories in just the right spot. 

• POWERFUL: Our E-Sea Suction Mount provides an ultra strong hold. 50+lbs of suction power
• VERSITILE: Its suction mount allows E-Sea Cleat to quickly be moved to the perfect spot on your boat
• EASY TO USE: Easy spin-on & spin-off installation means no drilling holes
• HEAVY-DUTY: Durable UV resistant material built to last in harsh environments
• Easily tie up or anchor paddle boards and kayaks
• Secure boat fenders and other accessories with ease

 

Specs:

• 4.5" cleat size
• Ideal for ropes 1/2" or less
• Not for loads over 50lbs. 
• 4.5"L x 4.25"W x 2.25"H

Compatibility:

The E-Sea Cleat is compatible with most smooth surfaces, including but not limited to:

• Boats- Securing fenders and storing ropes
• Paddle Boards
• iSUPS (Use E-Sea Mounting Discs)
• Kayaks
• RVs
• Home use and more
• If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

Product Care:

• For best results, remove and reinstall suction mount before each use.
• The suction cups can be washed with mild soap and water.

To Install:

• Clean and dry the surface where the E-Sea Cleat will be mounted before applying the suction mount. Do not moisten the suction cup.
• Place the suction cup on the smooth surface, pressing firmly on the center screw.
• Position the E-Sea Cleat onto the suction cup and begin to spin the mount in a clockwise direction.
• After 5 full turns (10 short turns), the suction mount is fully tightened. Do not overtighten.
• If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

To Remove:

• Twist the E-Sea Cleat mount counterclockwise until fully unscrewed from the suction cup.
• With your fingernails, lift the outer edge of the suction cup and pull it away from the mounting surface. 

*Remove and re-install before next use.